What is the best overall all-mountain ski binding?
The best overall all-mountain ski binding is the Look Pivot 2.0 15 GW, which held Ryan's 215 lb through 5-foot drops with zero unwanted pre-release.
Look Pivot 2.0 15 GW
- Weight: 2,490 g pair
- Max DIN: 15
- Brake width: 105 mm
- Tested at DIN: 8.0 and 10.0
Bottom Line : The strongest hold and the calmest ride of the ten, with a 10.0 for retention. It's also the heaviest at 2,490 g and the hardest to click into on a steep pitch.
Pros
- Retention 10.0: no pre-release for Ryan off 5-foot drops
- No dead spots underfoot; edge drive was instant on hard snow
- All-metal housings soaked up chatter on refrozen wind ruts
- Per the testers' notes, 45 mm of toe elasticity and 28 mm of heel travel
Cons
- Heaviest binding here at 2,490 g
- Steep-slope step-in took work: 5 of 10 tries on a 28-degree pitch
- A plastic heel cover cracked in the cold, and a boot cuff chipped a brake arm
Who it's best for
Tom led the testing, with Ryan co-testing. It suits heavy, hard-charging skiers who land drops and ski chop fast, and who mostly click in on flat ground. The notes say it's the wrong binding for skiers under 140 lb, because its lowest DIN setting is 6.0.
Why we love it
Edge Hold (9.5). The notes say the short mounting footprint, which they count as seven screw holes, let the Brahma 88 flex without dead spots. Lateral drive was instant on injected hard snow.
Damping (9.5). A cast-aluminum toe housing and a heavy steel turntable heel soaked up violent chatter across refrozen wind ruts in Tom's and Ryan's runs.
Retention (10.0). The only perfect score of the test. The notes say the toe gives 45 mm of lateral elasticity and the heel 28 mm of vertical travel, and together they carried Ryan's 215 lb off 5-foot drops at Peruvian Cirque with zero unwanted pre-release.
What we didn't like
Step-in is the honest flaw (7.0). The rotating heel needs the boot lined up exactly. On a 28-degree slope the testers got it on 5 of 10 tries, because the turntable swung out of line on the first attempts. Every other binding here took 3 of 3, bar one (the Squire 11, 2 of 3). The way around it: step in on flat ground, or learn to drop the pole tip dead-center into the metal notch.
Two hardware notes. On day 4, at 11°F, Ryan pried the heel lever down with a pole and cracked a plastic cover over the heel spring arm. Tom says it's cosmetic, but that thin plastic gets brittle in the cold. And the 105 mm brakes dog-leg outward: on an 88 mm ski, Ryan's inside boot cuff hit the arm in tight carves and chipped the paint to bare metal. At 2,490 g, it's also the heaviest binding here.
On tight, feet-together carved turns down Gad Valley, my inside boot cuff smacked the brake arm hard enough to chip the black powder coat down to bare metal.
Ryan, in the testers' notes
Should you buy it?
Buy it if you're heavy or hard on gear and you'd rather never think about pre-release: it's the most heavily built binding we tested. Skip it if you're light, if weight matters, or if you click in on steep traverses. The Atomic Strive 14 GW matched its 90, weighs 530 g less and made 3 of 3 steep step-ins. The Pivot is the premium pick here. Check the brake width against your ski waist: ours was 105 mm on 88 mm skis, and this listing is the 105 mm version.
Read our full Look Pivot 2.0 15 GW review →
What is the best all-mountain ski binding for advanced skiers?
The best all-mountain ski binding for advanced skiers is the Atomic Strive 14 GW, whose low toe gave Tom and James a close-to-the-snow edge on firm snow without the weight of an all-metal binding.
Atomic Strive 14 GW
- Weight: 1,960 g pair
- DIN range: 5 to 14
- Brake width: 100 mm
- Tested at DIN: 8.0 and 8.5
Bottom Line : A close-to-the-snow edge feel, a light, positive click-in and 530 g less than the Pivot, for the same 90. Its plastic parts want a shop check after a hard season.
Pros
- Edge Hold 9.5 from a low toe that keeps the boot near the ski
- Light, positive click-in: 10 of 10 on flat, 3 of 3 on steep
- Held James through hard carves, released when he crossed his tips on purpose
- Weighs 1,960 g, 530 g under the Pivot
Cons
- A small plastic clip under the sliding plate hopped out in wet slush
- Heel track showed 0.75 mm of fore-aft play after 18 hard days
- No screw to take play out of a worn boot sole
Who it's best for
Tom led the testing, with James co-testing. It suits advanced skiers on 88 to 100 mm skis who want a sharp, close-to-the-snow feel and an easy click-in. The notes say it's wrong for skiers who want the mass damping and sideways heel release of a metal turntable.
Why we love it
Edge Hold (9.5). The maker says the toe is a Low Drive Toe (LDN) that keeps the boot close to the ski, and the notes call the micro-edging feel on firm groomed runs exceptional.
Step-In (9.0). A light, positive snap, and a wide heel funnel that steers the boot lugs into the toe jaws. It made all 10 flat tries and 3 of 3 on the 28-degree pitch.
Damping (8.5). The notes credit a 72 mm sliding plate for stopping lateral roll, and a polymer body that soaks up chatter without feeling mushy.
Retention (9.0). It held James cleanly through hard, loaded turns and released when he crossed his tips deliberately in a recovery drill.
What we didn't like
Look at the plastic. In the shop, Tom found a small spring clip under the sliding plate that centers it. When boots with wet slush were forced in off-angle, the clip hopped out of its track, the Teflon pad drifted 3 mm sideways, and the binding failed the sideways release test until he popped the clip back with an awl. If you ski wet snow, have a shop look under the plate.
The heel track is polymer, not steel. After 18 hard days and some stiff flat landings, James benched his pair and measured 0.75 mm of fore-aft play on the center screw. And the toe height is fixed, so there's no screw to dial play out on worn boot soles. Damping is also a step behind the Pivot (8.5 against 9.5).
In the shop, when boots with wet slush were forced in off-angle, that clip hopped out of its track.
Tom, in the testers' notes
Should you buy it?
For an advanced skier, this is the best all-rounder among the advanced picks, and the notes name it best for all-around performance. If you drop cliffs, look at the Pivot instead, since its metal turntable damps and holds better. It's mid-price for 90 out of 100. Ask a shop to check the forward pressure and the sliding plate once a season. Our brake width was 100 mm.
Read our full Atomic Strive 14 GW review →
What is the best all-mountain ski binding for heavy skiers?
The best all-mountain ski binding for heavy skiers is the Marker Jester 16, whose magnesium parts held Ryan's 215 lb through deep drops and hard compressions with total security.
Marker Jester 16
- Weight: 2,160 g pair
- Max DIN: 16
- Brake width: 90 mm
- Tested at DIN: 10.0 and 8.0
Bottom Line : Very strong retention and damping for a heavy skier, in a binding that's 330 g lighter than the Pivot. The step-in is stiff and it's overbuilt for most 88 mm skis.
Pros
- Retention 9.5 under Ryan's 215 lb off deep drops
- Damping 9.0: magnesium parts quieted refrozen crust and chop
- Edge Hold 9.0 with no twist or lag
- 330 g lighter than the Pivot
Cons
- Stiff step-in: needs an aggressive downward stomp
- Toe height screw backed down a quarter turn in three days
- Slush froze behind the heel cam and locked it
Who it's best for
Ryan led the testing, with Tom co-testing; Libby sat this one out. It suits heavy, aggressive skiers who charge chop and drops. The notes say it's the wrong binding for skiers under 160 lb, or for casual cruising speeds.
Why we love it
Edge Hold (9.0). The toe and a cross-mounted spring drove power into the ski with no twisting lag, in Ryan's runs.
Damping (9.0). The maker says the toe and heel use magnesium parts, and the notes say the magnesium inserts quieted the ski through refrozen sun crust and heavy chop.
Retention (9.5). It held Ryan's 215 lb through deep drops and hard compressions with total mechanical security, and was second only to the Pivot.
What we didn't like
The step-in is stiff (8.0). The heel needs an aggressive downward stomp, and the notes say the force is high for lighter skiers. It also felt overbuilt on an 88 mm all-mountain ski unless skied hard.
Two things to watch. Tom found the manual toe height screw backed down a quarter turn after three days of chatter on hard snow, leaving a 0.4 mm gap above the sliding plate: check it with a feeler gauge every couple of weeks. And in wet snow that froze, Ryan found ice packed behind the heel spring rollers and the heel cup couldn't slide back to open. He had to chip it out with a pocket screwdriver before he could step in. The front Anti Ice Rail scrapes boots well; the heel has no equivalent.
I had to chip it out with a pocket screwdriver before I could step back in.
Ryan, in the testers' notes
Should you buy it?
Heavy skiers who ski hard get the lighter route to the Pivot's retention here. The notes call it wrong for skiers under 160 lb, and for anyone who wants an effortless click-in: the Attack 14 GW needed far less force. It's mid-price for 88 out of 100. Our brake width was 90 mm, 2 mm over the ski waist.
Read our full Marker Jester 16 review →
What is the best all-mountain ski binding for carving?
The best all-mountain ski binding for carving is the Tyrolia Attack 14 GW, whose wide sliding plate passed high-angle edge changes straight into the ski, with the lightest click-in of any 14-DIN binding here.
Tyrolia Attack 14 GW
- Weight: 2,020 g pair
- DIN range: 4 to 14
- Brake width: 95 mm
- Tested at DIN: 8.0 and 8.5
Bottom Line : A wide sliding plate for carving and the easiest step-in of the 14-DIN bindings. It's firmer over hard ice than the heavier bindings, and its toe height needs careful tuning.
Pros
- Step-In 9.5, the lowest effort of the 14-DIN bindings
- Edge Hold 9.0 from a wide sliding plate
- Released smoothly in a deliberate tip-cross test
- Just 2,020 g, 470 g under the Pivot
Cons
- Sharp vibrations reach the boot on blue ice (Damping 8.0)
- Toe height screw needs a precise hand to set
- James warns the heel lift tab bends if pried past 30 degrees
Who it's best for
Tom led the testing, with James co-testing. It suits carvers and lighter-frame skiers who want a low-effort click-in on cold mornings. The notes say it's wrong for hard-charging freeriders who want an ultra-damp, all-metal chassis.
Why we love it
Edge Hold (9.0). The notes put the sliding plate at 77 mm. The notes say that wide contact zone turned high-angle edge transitions straight into the edge.
Step-In (9.5). The notes say the three-piece heel needed the lowest downward force of any 14-DIN binding in the test. It was the joint-easiest here, level with the Attack LYT 11 GW.
Retention (8.5). Clean through hard, loaded turns, and a smooth, predictable release in a deliberate tip-cross test.
What we didn't like
Damping is the weak spot (8.0). The composite toe body drives well, but sharp vibration passes into the boot sole on blue ice, and it has less mass than the Pivot or Jester to calm frozen ruts.
Tom's notes say the toe height is set by a screw that pulls a wedge up a ramp. If a tech doesn't push down on the toe while tightening, the wedge binds without seating: on day 2 James's left toe showed a 1.2 mm gap. Have the shop torque it with the toe pre-loaded. And don't pry the heel lift tab with a screwdriver: James warns that in the cold, at 16°F, prying it past 30 degrees can bend the spring detent tooth so it won't seat in the track.
You must torque it while pre-loading the toe.
Tom, in the testers' notes
Should you buy it?
Carvers who want the easiest step-in at this DIN, and who ski cold mornings, should start here. Frozen chop is where it falls short, since the Pivot (9.5) and Jester (9.0) damp better. It's mid-price for 87.5 out of 100. Our brake width was 95 mm.
Read our full Tyrolia Attack 14 GW review →
What is the best all-mountain ski binding for easy step-in?
The best all-mountain ski binding for easy step-in is the Tyrolia Attack LYT 11 GW, which scored a joint-best 9.5 for step-in, the easiest to click into of the ten.
Tyrolia Attack LYT 11 GW
- Weight: 1,680 g pair
- DIN range: 3 to 11
- Brake width: 95 mm
- Tested at DIN: 6.5 and 8.5
Bottom Line : The lightest-feeling click-in and one of the lightest bindings at 1,680 g. It's softer underfoot, so it chatters on refrozen debris.
Pros
- Step-In 9.5, the joint-easiest of the ten
- Just 1,680 g, 810 g under the Pivot
- Smooth, predictable release for Libby at DIN 6.5
- Quick edge-to-edge roll on 88 mm skis
Cons
- Chatters through afternoon refrozen debris (Damping 7.0)
- A 1.1 mm gap above the sliding plate on worn boots that Tom couldn't adjust out
- Thin toe shell gouged by a ski tip in a bump line
Who it's best for
Libby led the testing, with James co-testing; Ryan was benched. It suits lighter skiers and light skis. The notes say it's wrong for powerful skiers over 160 lb or anyone skiing fast chop who needs mass underfoot.
Why we love it
Step-In (9.5). An extremely light heel engagement, the easiest in the whole lineup for lighter skiers.
Edge Hold (7.5). It rolls quickly from edge to edge on an 88 mm waist, though the notes record minor twist under hard lateral loads.
Retention (7.5). Reliable for Libby at DIN 6.5, with a smooth release on rotational loads and no sudden ejection.
What we didn't like
Damping is low (7.0). A lightened toe body passes vibration straight through on fast chop, and when Tom clicked in Libby's worn GripWalk boots he found a visible 1.1 mm gap above the sliding plate that he couldn't adjust out. The notes say Tyrolia dropped the manual ramp-screw AFD for a fixed-height entry profile, so this is play you can't adjust out on worn soles. On hard injected snow, that play delays edge bite.
The toe shell is thin. In the Peruvian bump line Libby's ski tip crossed an icy mogul crown, whacked the toe wing of the other binding and gouged the polymer deeply. The Attack 14 GW shrugs that off.
The Attack 14 shrugs that off, but this lightweight resin is much softer.
Libby, in the testers' notes
Should you buy it?
Put the Attack LYT 11 GW on light skis under a lighter skier who values an easy click-in above all. Over 160 lb or in fast chop, the Attack 14 GW has the same step-in score and more mass. It's mid-price and scores 85.5 out of 100. Our brake width was 95 mm.
Read our full Tyrolia Attack LYT 11 GW review →
What is the best all-mountain ski binding for light skiers?
The best all-mountain ski binding for light skiers is the Look SPX 11 GW, whose 27 mm of vertical heel travel steadied Libby through afternoon chop at DIN 6.5.
Look SPX 11 GW
- Weight: 2,110 g pair
- Max DIN: 11
- Brake width: 90 mm
- Tested at DIN: 6.5 and 8.0
Bottom Line : A steady, even binding, 8.0 on every metric, with long heel travel for chop. It's heavy for an 11-DIN binding and its polymer heel flexes under big loads.
Pros
- Even 8.0 across all four metrics
- 27 mm of vertical heel travel, per the notes
- Long lever gives easy pole-tip step-out
- Confident hold for Libby
Cons
- Heavy for an 11-DIN binding at 2,110 g
- Shallow pole cup on the heel lever
- Heel carriage twisted on the track at DIN 8.0
Who it's best for
Libby led the testing, with Tom co-testing; Ryan was benched. It suits lighter skiers who ski at about DIN 6.5 and want an elastic heel. The notes say it's wrong for skiers whose DIN is above 8.
Why we love it
Edge Hold (8.0). The toe passed energy into the Brahma 88 edges with predictable feedback.
Damping (8.0). The notes put 27 mm of vertical travel in the semi-turntable heel, and it calmed afternoon chop better than the lightweight composite bindings.
Retention (8.0). Libby felt confident. Tom felt the binding reach its upper elastic limit on hard, compressed dropouts.
What we didn't like
Weight is the biggest complaint. At 2,110 g it's heavy for an 11-DIN binding, and the toe housing lacks the cast-metal stiffness of the Pivot 15.
The heel is polymer. When Tom skied it at DIN 8.0, Libby watched the heel plate twist on the track in hard lateral loading, and on ice that slight flex made the tail feel vague at the end of a carve. The lever's pole cup is also shallow: in freezing fog on day 6, pole tips kept skidding off, and skiers then stomp the back of the binding, which can gouge the forward pressure window.
It needs a deeper metal-reinforced strike pocket.
Tom, in the testers' notes
Should you buy it?
Lighter skiers who want a calm, even, mid-price binding are the target here. Anyone whose DIN is above 8 should look at a heavier binding such as the Attack 14 GW. It scores 83.5 out of 100. Our brake width was 90 mm.
Read our full Look SPX 11 GW review →
What is the best all-mountain ski binding for moguls?
The best all-mountain ski binding for moguls is the Marker Griffon X 13, which held Ryan through the moguls at Peruvian Cirque with zero unwanted pre-release.
Marker Griffon X 13
- Weight: 2,060 g pair
- DIN range: 4 to 13
- Brake width: 105 mm
- Tested at DIN: 8.0 and 10.0
Bottom Line : A dependable all-rounder with solid retention and a scraper that clears the toe. The heel is stiff to latch, and the 105 mm brake overhangs an 88 mm ski.
Pros
- Held Ryan through steep moguls with no pre-release
- Direct turn start with little slop on the 88 mm ski
- The maker lists an Anti Ice Rail toe scraper
- Weighs 2,060 g
Cons
- Stiff, centered heel stomp needed to latch
- Heel looked locked but wasn't, once, on a 28-degree pitch
- Some vibration through the plastic housing over refrozen ruts
Who it's best for
Tom led the testing, with Ryan co-testing. It suits skiers who want a reliable, all-round binding for moguls and mixed days. The notes say it's wrong for skiers under 135 lb, who struggle to make enough downward heel force to latch it on a slope.
Why we love it
Edge Hold (8.5). A horizontal toe spring gives a wide stance on the Brahma 88, and turn initiation was direct with little slop.
Retention (8.5). It held Ryan securely through the Peruvian Cirque moguls with zero unwanted pre-release.
Damping (8.0). High-speed composure was adequate, with some vibration through the plastic housing over refrozen ruts.
What we didn't like
The heel is stiff to latch (8.0). It needs a sharp, centered heel stomp, and it's tougher than the Strive or Attack heels. Ryan found the trap on a 28-degree slope off the Cirque traverse: the ski tail flexed into soft snow, the heel made a dull click that looked locked, but the lever was only half-cocked, and the boot popped out when he weighted the ski. Always check the lever is pulled flush.
Some vibration rattles through the plastic housing over refrozen ruts, and the 105 mm brake leaves excess overhang on an 88 mm waist. A Tom shop warning: never turn the forward pressure screw with the boot in or the lever closed, because the steel thread strips the plastic track ribs.
The heel made a dull click that looked locked, but the lever was only half-cocked. When I weighted the ski, the boot popped right out.
Ryan, in the testers' notes
Should you buy it?
Pick the Griffon X 13 for a trustworthy, mid-priced all-rounder for moguls and mixed days. Lighter skiers, or anyone who wants the lightest click-in, will find the Attack 14 GW easier to latch. It's mid-price for 82.5 out of 100. Our brake width was 105 mm, so check it against your ski.
Read our full Marker Griffon X 13 review →
What is the best all-mountain ski binding for bad knees?
The best all-mountain ski binding for bad knees is the Tyrolia Protector PR 13 GW, whose Full Heel Release heel lets the boot out sideways, the design the testers' notes tie to lower twisting loads on the knee.
Tyrolia Protector PR 13 GW
- Weight: 2,380 g pair
- DIN range: 4 to 13
- Brake width: 95 mm
- Tested at DIN: 8.0 and 6.5
Bottom Line : A predictable click-in and a sideways heel release aimed at twisting falls. It sits 33.5 mm above the ski, feels perched on ice and weighs 2,380 g.
Pros
- Smooth, predictable heel engagement
- Full Heel Release: a sideways heel release, per the notes
- Clear forward pressure window
- The rail isolates low-frequency chatter
Cons
- 33.5 mm stand height feels perched and tippy on firm ice
- A rail click under the arch under hard carves
- Heel and toe rail notches must be set carefully
Who it's best for
Tom led the testing, with Libby co-testing. It suits skiers who put a twisting-fall release first and accept a taller, heavier rig. The notes say it's wrong for skiers who want a low stack height, flat boot-to-ski contact and minimal weight.
Why we love it
Edge Hold (8.5). The tall stand height gives a long lever for quick edge changes, though it dulls the feel of the snow.
Step-In (8.5). The notes call the heel track engagement smooth and predictable, with a forward pressure window that's easy to read.
Damping (8.0). The multi-layer rail isolates low-frequency chatter, though the high stack gives some lever play in deep ruts.
What we didn't like
The stack height is the trade. At 33.5 mm it feels perched on scraped ice, and Tom's bench notes record a subtle torsional click under the arch in hard carves, where the two-piece rail flexes. It doesn't release, but you feel that extra layer moving.
Setup is fussy (Retention 8.0). Libby's 285 mm boot sole sat right on the boundary between two rail notches. When the tech set the heel one notch tighter to hit forward pressure, it pre-loaded the sideways release spring, and on a fast compressed turn across frozen ruts the heel released without a fall. Balance the toe and heel notches before you ski it. On injuries: the notes describe the heel as built to reduce twisting loads on the knee. We didn't test injury protection, and no binding promises it.
You must balance the toe and heel track index notches perfectly.
Libby, in the testers' notes
Should you buy it?
A sideways heel release is the reason to choose the Protector, and a shop should set its rail notches. Firm ice is where it struggles, since the Strive 14 GW sits much lower. It's upper-mid for 82.5 out of 100. Our brake width was 95 mm, and the listing says it needs a mounting rail on flat skis.
Read our full Tyrolia Protector PR 13 GW review →
What is the best all-mountain ski binding for the money?
The best all-mountain ski binding for the money is the Atomic Strive 10 GW, whose smooth, light click-in came on a 1,650 g chassis and a budget tier.
Atomic Strive 10 GW
- Weight: 1,650 g pair
- DIN range: 3 to 10
- Brake width: 100 mm
- Tested at DIN: 6.5 and 8.5
Bottom Line : This budget binding has a smooth, easy click-in and a 1,650 g body. A composite toe flexes on firm snow and DIN stops at 10.
Pros
- Step-In 9.0, with a heel that guides the boot lugs in
- 1,650 g, 840 g under the Pivot
- Release values stayed consistent in the cold
- Budget tier, with a smooth click-in
Cons
- Composite toe walls flex on hard snow
- DIN caps at 10
- Brake elbow skimmed the snow when laid far over
Who it's best for
Libby led the testing, with James co-testing; Ryan was benched. It suits lighter, moderate-speed skiers on a budget. The notes say it's wrong for advanced Type III skiers, anyone over 160 lb, or anyone who needs a burly metal chassis.
Why we love it
Step-In (9.0). Smooth entry and exit, with a broad heel track that guides the boot lugs into place. The maker adds Backrollers in the heel for easy entry.
Edge Hold (7.5). The low profile keeps the boot close to the ski, though the composite toe walls flex a little on hard snow.
Retention (7.5). Solid lateral hold at moderate pace, and release values stayed consistent through every cold test cycle.
What we didn't like
The toe is the compromise. Tom's notes say the unreinforced glass-filled nylon toe wings splayed open by more than a millimeter on the release tester at DIN 7.0 before the spring broke over center. That give causes edge washing on hard snow. The lightweight chassis also lets chop vibrations through (Damping 7.0).
James also found the 100 mm brake arms don't tuck as close to the ski as the Strive 14's. When he laid the ski far over on hard morning runs, the inside brake elbow skimmed the frozen crust and buzzed the ski.
That lateral give causes edge washing on injected snow.
Tom, in the testers' notes
Should you buy it?
Moderate-pace skiers on a budget get a budget binding in the Strive 10 GW. The notes call it wrong over 160 lb, so heavier or harder-skiing skiers should look at the Strive 14 GW. It scores 82 out of 100. Our brake width was 100 mm.
Read our full Atomic Strive 10 GW review →
What is the best all-mountain ski binding for progressing skiers?
The best all-mountain ski binding for progressing skiers is the Marker Squire 11, which weighed just 1,640 g, the lightest binding here, and held Libby securely at DIN 6.5.
Marker Squire 11
- Weight: 1,640 g pair
- DIN range: 3 to 11
- Brake width: 100 mm
- Tested at DIN: 6.5 and 8.0
Bottom Line : The lightest binding at 1,640 g, in the budget tier. It scored lowest here: Tom's heavier frame flexed it, and slush froze in its open heel.
Pros
- The lightest binding here at 1,640 g
- Handled Libby's runs securely at DIN 6.5
- Budget-priced
- The listing names alpine and GripWalk sole support
Cons
- Lowest damping here (6.5): rattled in frozen ruts
- One toe pre-release with Tom in deep ruts
- Slush froze in the open heel pocket and opened the binding
Who it's best for
Libby led the testing, with Tom co-testing; Ryan was benched. It suits lighter, progressing skiers on a budget. The notes say it's wrong for aggressive skiers, anyone over 165 lb, or anyone charging refrozen off-piste snow.
Why we love it
Step-In (8.0). The maker says its heel cuts step-in force by 30%. The testers found it still firmer than the Attack LYT 11 GW.
Retention (7.0). It handled Libby's runs securely until slush got into the heel.
Edge Hold (7.0). It tracked fine under Libby's lighter pressure.
What we didn't like
It scored lowest of the ten (79 out of 100). Tom's 178 lb flexed the chassis on hard injected snow, the light plastic rattled in frozen ruts (Damping 6.5), and it recorded one toe pre-release with Tom under heavy forward load in deep ruts, the one toe pre-release the notes record.
Slush is its enemy. In afternoon transition slush, Libby found wet snow packed into an open pocket under the heel spring pivot and froze there. The lever didn't drop fully over-center, the forward pressure screw sat 2 mm proud, and the binding popped open on her second turn. On the steep pitch, a slush-packed heel latch cost one of three tries. Tom's bench note adds that the brake's plastic retainer clips are the weak point if you stomp on an icy sole.
The forward-pressure screw was sitting 2 mm proud of the housing, and the binding popped open on my second turn down Peruvian.
Libby, in the testers' notes
Should you buy it?
The Squire 11 is for lighter, progressing skiers who want the lightest, simplest binding here and will wipe slush from the heel. Under 150 lb, the Attack LYT 11 GW needs far less step-in force. It's budget-priced, and the lowest scorer at 79 out of 100. Our brake width was 100 mm.
Read our full Marker Squire 11 review →
How did we test the all-mountain ski bindings?
We tested the all-mountain ski bindings by skiing all ten on identical Blizzard Brahma 88 skis at Snowbird and Alta, then scoring each on edge hold, step-in, damping and retention and weighing every pair on a bench scale.
A ski binding has four jobs: turn the ski when you tip it, let you click in without a fight, calm the ski in rough snow, and stay on until it should let go. Four testers skied them, from a heavy, hard-charging skier to a lighter freeride skier, a ski-shop boot fitter and a former regional racer.
The snow ranged from hard, injected morning snow at 14°F and sun-baked, wind-buffed chop and refrozen ruts at 28°F, to steep moguls and 3-to-5-foot rock drops off Peruvian Cirque. Every binding went on its own pair of Brahma 88 skis (177 cm, 128-88-110 mm, 16 m radius), mounted at the factory boot center and audited by a certified shop technician, who the notes say checked forward pressure, sliding-plate clearance and release values on a calibrated release tester. The DIN for each tester is in the table below. All four wore GripWalk boots.
| Tester | Height | Weight | Age | Boots | DIN (shop set) |
|---|---|---|---|---|---|
| Tom | 5 ft 11 | 178 lb | 36 | Lange RS 130 | 8.0 |
| James | 5 ft 10 | 172 lb | 33 | Nordica Promachine 130 | 8.5 |
| Libby | 5 ft 7 | 142 lb | 30 | Tecnica MV115W | 6.5 |
| Ryan | 6 ft 2 | 215 lb | 38 | Dalbello 130ID | 10.0 |
Each binding was skied by a lead tester and a co-tester, listed in each card above, and scored out of 10. Not every tester skied every binding: Ryan sat out the SPX 11, Attack LYT 11, Strive 10 and Squire 11, and Libby sat out the Jester 16. The four qualities:
- Edge Hold: how fast the ski answers when you tip it on firm snow, and any play or lag
- Step-In: ten clicks on flat ground and three on a 28-degree pitch (the Pivot got ten), and how easy each binding was to step out of
- Damping: how well the binding calmed the ski through chopped snow, refrozen ruts and blue ice
- Retention: steep moguls, 3-to-5-foot drops and hard landings, and any unwanted release
- Weight (measured, not scored): one pair with its factory hardware and unshortened brakes, dry, on a calibrated bench scale (±0.5 g)
The overall score out of 100 is the binding's one sitewide score. A binding that appears in more than one of our guides has one score everywhere: the average of its results across those guides. The metric bars show this guide's own test. The Pivot and Strive 14 tied on 90, and the Pivot ranks first because it scored higher for retention. The Griffon X 13 and Protector PR 13 tied on 82.5, and the Griffon ranks first for the same reason. Specs such as maximum DIN and the sole standard come from the listing where it states them; boot, DIN, brake width and every result come from the testers' notes. We don't score price; where a binding's value stands out we say so in tiers (premium, upper-mid, mid-price, budget), and the Check Latest Prices button shows the current number. You can meet the testers at the bottom of this page.
Which all-mountain ski binding suits your skiing?
The right all-mountain ski binding depends on your weight and how hard you ski: pick by the row that matches you.
| If you're… | Buy |
|---|---|
| Heavy or hard on gear, landing drops, and clicking in on flat ground | Look Pivot 2.0 15 GW |
| An advanced skier who wants the closest-to-the-snow feel and an easy click-in | Atomic Strive 14 GW |
| Heavy, aggressive and charging chop | Marker Jester 16 |
| Carving, and wanting the easiest step-in at 14 DIN | Tyrolia Attack 14 GW |
| Skiing moguls and mixed days on one reliable binding | Marker Griffon X 13 |
| Putting a sideways heel release first, and happy with a tall stand height | Tyrolia Protector PR 13 GW |
| Light, skiing around DIN 6.5, and wanting an elastic heel | Look SPX 11 GW |
| Light, on light skis, and wanting the easiest click-in | Tyrolia Attack LYT 11 GW |
| Watching the budget, and skiing at a moderate pace | Atomic Strive 10 GW |
| Light, progressing and wanting the lightest binding | Marker Squire 11 |
What did our all-mountain ski binding tests show?
Our all-mountain ski binding tests showed that metal and mass won on retention and damping, while the light bindings won on step-in, and the Look Pivot 2.0 15 GW and Atomic Strive 14 GW tied on 90 for opposite reasons.
Where each quality was tested, what separated the bindings, and what skiing them felt like. Each binding's four scores are also in its card above.
How well do all-mountain ski bindings hold an edge?
The best edge-holding all-mountain ski bindings were the Look Pivot 2.0 15 GW and Atomic Strive 14 GW, which each scored 9.5.
Where we tested it. Hard, injected morning snow and firm groomed runs, with the testers feeling for lag, play and dead spots.
What separated them. The Pivot and Strive 14 tied at 9.5 by different routes. The Pivot's short mounting footprint left the ski free to flex, and the Strive 14's low toe, which the notes say gave exceptional micro-edging on firm groomed runs. The Jester 16 and Attack 14 followed at 9.0, the Attack on a wide 77 mm sliding plate.
The bottom was about flex. The Squire 11 flexed under Tom's 178 lb on hard snow (7.0), and the Attack LYT 11 and Strive 10 sat at 7.5, with a twisting toe and composite toe walls that flexed on hard snow.
What it felt like. The notes describe the Pivot's drive as instant and the Strive 14's as exceptional micro-edging. At the other end, the Attack LYT 11 twisted slightly under hard lateral loads, the Strive 10's toe walls flexed and the Squire flexed under Tom's weight.
| Binding | What we found |
|---|---|
| Look Pivot 2.0 15 GW | Short footprint, instant lateral drive, no dead spots |
| Atomic Strive 14 GW | Low toe, exceptional micro-edging on firm snow |
| Marker Jester 16 | No twisting lag; uncompromised power into the ski |
| Tyrolia Attack 14 GW | Wide 77 mm plate turns edge changes straight into the edge |
| Marker Griffon X 13 | Wide stance on 88 mm skis, direct turn start |
| Tyrolia Protector PR 13 GW | Tall stand height speeds edge changes, dulls snow feel |
| Look SPX 11 GW | Solid energy transfer, predictable feedback |
| Tyrolia Attack LYT 11 GW | Quick roll, some twist under hard lateral loads |
| Atomic Strive 10 GW | Low profile; composite toe walls flex on hard snow |
| Marker Squire 11 | Chassis flexed under 178 lb on hard snow |
How easy are all-mountain ski bindings to step into?
The easiest all-mountain ski bindings to step into were the Tyrolia Attack 14 GW and Attack LYT 11 GW, which each scored 9.5.
Where we tested it. Ten clicks in a row on flat ground, then three on a 28-degree pitch (ten for the Pivot).
What separated them. Two Tyrolia bindings scored 9.5, and the Atomic Strive 14 and Strive 10 followed at 9.0. The notes say the Attack 14's three-piece heel needed the lowest downward force of any 14-DIN binding here. All ten made every flat attempt, and eight made 3 of 3 on the steep pitch.
The exceptions tell the story. The Look Pivot 2.0 15 GW scored 7.0, making 10 of 10 on flat ground but only 5 of 10 on the pitch, because the turntable swung out of line on the first attempts. The Squire 11 made 2 of 3, as wet slush packed under its heel latch.
What it felt like. The notes call the Strive 14 and Attack heels light and positive. The Pivot needed the boot aligned exactly, and the Jester 16 needed an aggressive stomp, which the notes say is a lot for lighter skiers.
| Binding | What we found |
|---|---|
| Tyrolia Attack 14 GW | Lowest force of any 14-DIN binding; 3 of 3 on the pitch |
| Tyrolia Attack LYT 11 GW | Extremely light heel; easiest for lighter skiers |
| Atomic Strive 14 GW | Light, positive snap; wide heel funnel |
| Atomic Strive 10 GW | Smooth entry and exit; broad heel track |
| Tyrolia Protector PR 13 GW | Smooth, predictable heel track; clear forward pressure window |
| Marker Jester 16 | Needs an aggressive downward stomp |
| Look SPX 11 GW | Long lever helps step-out; deliberate snap to step in |
| Marker Griffon X 13 | Sharp, centered stomp; once half-cocked on a slope |
| Marker Squire 11 | Firm push; slush on the pitch cost a try (2 of 3) |
| Look Pivot 2.0 15 GW | Turntable needs exact alignment; 5 of 10 on the pitch |
How well do all-mountain ski bindings damp rough snow?
The best all-mountain ski binding for calming rough snow was the Look Pivot 2.0 15 GW, with a 9.5 for damping.
Where we tested it. The same run through chopped, sun-baked snow and refrozen ruts, then blue ice, with the testers feeling for chatter through the boot soles.
What separated them. The Pivot scored 9.5 on a cast-aluminum toe housing and a heavy steel turntable. The Jester 16 followed at 9.0 on magnesium parts, and the Strive 14 at 8.5 on a polymer body that the notes say soaked up chatter without feeling mushy.
Four bindings tied at 8.0 and the three lightest sat at the bottom: the Attack LYT 11 and Strive 10 at 7.0, and the Squire 11 at 6.5, where the light plastic rattled and deflected in frozen afternoon ruts.
What it felt like. Mass quieted the ski. The three lightest bindings (1,640 to 1,680 g) were the three that chattered.
| Binding | What we found |
|---|---|
| Look Pivot 2.0 15 GW | Cast aluminum and steel soaked up violent chatter |
| Marker Jester 16 | Magnesium parts quieted sun crust and chop |
| Atomic Strive 14 GW | Polymer body absorbs chatter, not mushy |
| Tyrolia Attack 14 GW | Solid drive; sharp vibration on blue ice |
| Look SPX 11 GW | Long heel travel calmed afternoon chop |
| Marker Griffon X 13 | Adequate; plastic housing rattles over ruts |
| Tyrolia Protector PR 13 GW | Rail isolates low-frequency chatter; lever play in ruts |
| Tyrolia Attack LYT 11 GW | Light toe body passes vibration through chop |
| Atomic Strive 10 GW | Light chassis lets chop through on scraped lines |
| Marker Squire 11 | Light plastic rattles and deflects in frozen ruts |
How well do all-mountain ski bindings stay on?
The all-mountain ski binding that held best was the Look Pivot 2.0 15 GW, the only one to score a 10.0 for retention.
Where we tested it. Steep moguls, 3-to-5-foot drops and hard landings, noting every unwanted release.
What separated them. The Pivot scored 10.0, with zero unwanted pre-release under Ryan's 215 lb off 5-foot drops. The Jester 16 followed at 9.5 and the Strive 14 at 9.0. The Attack 14 and Griffon X tied at 8.5, and the Protector PR 13 and SPX 11 at 8.0.
Two bindings let go on their own while skiing. The Squire 11 popped a toe for Tom in deep ruts under heavy forward load, and the Protector's heel released sideways for Libby once, after a rail notch was set too tight. The Griffon X is a different case. Ryan's boot popped out of a heel that looked latched but was half-cocked, on a 28-degree step-in, so that was a latching fault and not a retention release.
What it felt like. The notes record no unwanted release on the Pivot, Jester or Strive 14. The Squire 11 and the Protector each let go once.
| Binding | What we found |
|---|---|
| Look Pivot 2.0 15 GW | Zero pre-release at 215 lb off 5-foot drops |
| Marker Jester 16 | Total security through deep drops and compressions |
| Atomic Strive 14 GW | Held in hard turns; released on purpose |
| Tyrolia Attack 14 GW | Clean hold; smooth, predictable release |
| Marker Griffon X 13 | Zero pre-release in steep moguls |
| Look SPX 11 GW | Confident for Libby; Tom reached its elastic limit |
| Tyrolia Protector PR 13 GW | Firm on forward drops; one sideways release with a tight notch |
| Tyrolia Attack LYT 11 GW | Reliable at DIN 6.5; smooth release |
| Atomic Strive 10 GW | Solid at a moderate pace; consistent in the cold |
| Marker Squire 11 | One toe pre-release with Tom in deep ruts |
How much do all-mountain ski bindings weigh?
The all-mountain ski bindings we weighed ranged from 1,640 g to 2,490 g for a pair with factory hardware and brakes.
Where we tested it. We weighed each pair, dry, with factory mounting hardware and unshortened brakes, on a calibrated bench scale (±0.5 g). Weight is measured, not scored, so it's not in the overall number.
What separated them. The Marker Squire 11 was lightest at 1,640 g and the Look Pivot 2.0 15 GW heaviest at 2,490 g, a gap of 850 g, so the Pivot weighs about 52% more than the Squire. Three bindings sat under 1,700 g (the Squire 11, Strive 10 and Attack LYT 11), and the other seven between 1,960 g and 2,490 g. The Strive 14 GW matched the Pivot's 90 at 1,960 g. The Protector PR 13 GW, at 2,380 g, includes its mounting rail.
What it felt like. The notes call the Pivot's swing weight heavy, and the three lightest bindings (the Squire 11, Strive 10 and Attack LYT 11) were the three that scored lowest for damping.
| Binding | What we found |
|---|---|
| Marker Squire 11 | 1,640 g |
| Atomic Strive 10 GW | 1,650 g |
| Tyrolia Attack LYT 11 GW | 1,680 g |
| Atomic Strive 14 GW | 1,960 g |
| Tyrolia Attack 14 GW | 2,020 g |
| Marker Griffon X 13 | 2,060 g |
| Look SPX 11 GW | 2,110 g |
| Marker Jester 16 | 2,160 g |
| Tyrolia Protector PR 13 GW | 2,380 g |
| Look Pivot 2.0 15 GW | 2,490 g |
What do people ask about all-mountain ski bindings?
These are common questions about all-mountain ski bindings, answered from our own test results.
What brake width do I need on an 88 mm ski?
Pick a brake close to the ski waist. Our skis were 88 mm, so 90 to 100 mm brakes fit. The two 105 mm brakes, on the Pivot and Griffon X, stick out 17 mm past an 88 mm ski in total, about 8.5 mm a side. The notes call the Griffon's overhang excess, and Ryan's boot cuff chipped the Pivot's brake arm.
Do I need GripWalk or alpine bindings?
Match the binding to your boot sole. All four testers wore GripWalk boots (ISO 23223) on all ten bindings. The notes list ISO 23223 GripWalk for all ten bindings. Only the Squire 11 listing also names alpine ISO 5355. The other listings don't state the ISO numbers, so check the maker's page and your boot before you order.
Which all-mountain ski binding is easiest to step into?
The Tyrolia Attack 14 GW and Attack LYT 11 GW, each with a 9.5 for step-in. The Attack 14 is the one for stronger skiers: the notes say it needed the lowest force of any 14-DIN binding here. The Look Pivot 2.0 15 GW was the hardest, at 7.0, and made only 5 of 10 tries on a 28-degree pitch.
Who should set the DIN on my ski bindings?
A certified shop technician. Ours audited every binding's forward pressure and release on a calibrated release tester, at the DINs the notes list: 8.0 for Tom, 8.5 for James, 6.5 for Libby and 10.0 for Ryan. The lowest setting on the Pivot and Jester is 6.0, so the notes say light skiers should look elsewhere.
Are all-mountain ski bindings too light to trust?
Light means softer. The three lightest (1,640 to 1,680 g) held up at moderate loads but scored lowest for damping (6.5 to 7.0) and edge hold (7.0 to 7.5), and the one toe pre-release the notes record was on the Squire 11, with Tom under heavy forward load. The notes call the Squire 11 wrong for skiers over 165 lb, so ask a shop which binding fits your weight.
What are the 10 best all-mountain ski bindings?
The 10 best all-mountain ski bindings are the ten ranked above, led by the Look Pivot 2.0 15 GW.
For heavy, hard-charging skiers, buy the Look Pivot 2.0 15 GW if you can live with its 2,490 g and steep step-in. For most advanced skiers, the Atomic Strive 14 GW matched its 90 at 530 g less. Heavy skiers who ski chop should look at the Marker Jester 16, and carvers at the Tyrolia Attack 14 GW. Lighter skiers should choose the Look SPX 11 GW or Attack LYT 11 GW, and for budget, the Atomic Strive 10 GW.
Editor's Note, 16 November 2026: We added our teen ski binding tests, so the shared score for four bindings here moved by half a point to one point. The Tyrolia Attack LYT 11 GW is now 85.5, the Look SPX 11 GW 83.5, the Atomic Strive 10 GW 82 and the Marker Squire 11 79. The Strive 10 GW drops from 7th to 9th, behind the Griffon X 13 and Protector PR 13. The order of the other bindings and every award stay the same.
Editor's Note, 11 November 2026: We aligned the scores across our ski binding guides, so each binding now has one score everywhere: the average of its results in every guide it was tested in, rounded to the nearest half point. Every score on this page is now a whole number or a half point. The overall scores changed for the Marker Jester 16 (88), Tyrolia Attack LYT 11 GW (86), Look SPX 11 GW (84), Atomic Strive 10 GW (83) and Marker Squire 11 (78), which moved the Attack LYT 11 GW up to 5th, the SPX 11 GW to 6th and the Strive 10 GW to 7th, ahead of the Griffon X 13 and Protector PR 13. We also labelled weights as per pair, and corrected the weight-limit lines for the Jester 16, SPX 11 GW and Squire 11.
Editor's Note, 9 November 2026: New guide. In May 2026, Tom, James, Libby and Ryan skied ten all-mountain ski bindings on identical skis at Snowbird and Alta in Utah, in hard morning snow, refrozen ruts, moguls and 5-foot drops, and scored each on edge hold, step-in, damping and retention.
Our Testers
This guide was written from the field notes of Tom Harris, James Ward, Libby Smith and Ryan Williams.
- Sean Williams, Editor-in-Chief. A former commercial outdoor copywriter and gear journalist who runs Top-Notch Outdoor as an independent publisher, with no brand-funded trips and no supplied ad copy.
- Ryan Williams, Lead Tester. A heavy fleet equipment mechanic and commercial vehicle technician. At 6 ft 2 and 215 lb he is our heavy, high-impact user. Ryan led the testing on the Marker Jester 16 and co-tested the Look Pivot 2.0 15 GW and Marker Griffon X 13.
- Tom Harris, All-Mountain Ski Tester. A ski shop service manager and boot fitter, and a strong advanced skier who loves bowls and glades. Tom led the testing on the Look Pivot 2.0 15 GW, Atomic Strive 14 GW, Tyrolia Attack 14 GW, Marker Griffon X 13 and Tyrolia Protector PR 13 GW and co-tested the Marker Jester 16, Look SPX 11 GW and Marker Squire 11.
- James Ward, Alpine Ski & Fat Bike Tester. On skis since he was 3 and a former regional alpine racer, now a ski tuner and dryland fitness coach. James co-tested the Atomic Strive 14 GW, Tyrolia Attack 14 GW, Tyrolia Attack LYT 11 GW and Atomic Strive 10 GW.
- Libby Smith, Freeride Ski & Fat Bike Tester. A seasonal mountain bike trail builder and winter ski patroller, with several seasons of freeriding behind her. Libby led the testing on the Tyrolia Attack LYT 11 GW, Look SPX 11 GW, Atomic Strive 10 GW and Marker Squire 11 and co-tested the Tyrolia Protector PR 13 GW.
























